Watts (W) measure power. Watt-hours (Wh) measure energy. Output watts tell you whether a power station can supply a load; watt-hours tell you how much energy it stores.
This is an educational guide, with hypothetical calculations and no product recommendations or affiliate links. We have not measured the runtime of a power station.
Watts: can it run your devices?
Add the running watts of devices used at the same time and compare the total with the station’s continuous output rating. A hypothetical 60W device and a 20W light require 80W together. A battery’s capacity does not establish its output capability.
Check startup requirements separately. Motors can briefly draw more power when starting. A surge rating is not a continuous output rating; use the appliance and station documentation rather than a universal multiplier.
Watt-hours: how much energy do you need?
Energy (Wh) = power (W) × time (hours).
A steady 60W load for four hours uses 240Wh. Add a steady 20W light for those four hours and the total is 320Wh, or 0.32kWh. A kilowatt-hour equals 1,000 watt-hours. Virginia Cooperative Extension explains energy calculations and appliance labels.
These are energy requirements for the example loads, not a guarantee that a battery labeled 320Wh delivers four hours through an AC outlet.
Estimate runtime carefully
Jackery’s runtime guidance uses this rough calculation for steady loads:
Estimated hours = battery capacity (Wh) × 0.8 ÷ load (W).
Using that particular planning factor, a hypothetical 500Wh battery and steady 80W combined load give 500 × 0.8 ÷ 80 = five hours.
The 0.8 factor is manufacturer guidance, not a universal efficiency specification. Actual runtime varies with conditions and usage. Jackery specifically excludes variable or high-startup loads such as refrigerators, freezers and air conditioners from this simple method. Use model-specific guidance and leave a reserve.
Record the actual job
- Devices running together and their running watts.
- Startup power requirements and documented surge capability.
- Hours required for each load.
- Required outlets, voltage, frequency and appliance compatibility.
- Model-specific runtime guidance and the assumptions used.
Settings affect power consumption, and a refrigerator cycles on and off. Its running wattage alone does not determine several hours of energy use. Check actual appliance documentation rather than treating a generic wattage chart as a measurement.
First establish that a station can start and run the devices, then estimate whether its stored energy covers the required duration. Keep assumptions beside the calculation.
Sources checked September 29, 2026. Source links above provide research context, not endorsements or shopping links.